NE File Utility
----------------------------------------------------------------------------
Version: v0.40-RC1
   Date: 06-22-2020
 Author: Erik Eriksen
   Site: http://eriks.servehttp.com
----------------------------------------------------------------------------
About:
  NE File Utility is a file management utility similar to File Manager
  found in Windows 3.x or DOS Shell found in DOS 5.0. The application 
  allows you to copy/move/create/modify/rename/etc your directories 
  and files. It also gives you a visual way to navigate your hard drive
  instead of accessing items directly through the command line.

  This application came about largely because I've never really tried to
  make an application like this using QuickBasic and I figured it would
  be a fun little project to work on. Hopefully someone else can also
  find it useful.

----------------------------------------------------------------------------
Minimum System Requirements:
  IBM PC/XT or greater
  512Kb of RAM (May also work on 256Kb but haven't tested)
  *Hercules Monochrome Adapter or CGA or greater.
  **Hard Drive or two floppy drives

Note: IBM MDA may work but has not been tested yet. (Will be 
      before release). 

Note: The application will in fact run off a floppy disk (tested as low 
      as a 360Kb) but temp files will be saved where the application is
      run from so if you do not have a hard drive and only one floppy 
      drive, it will write the temp files to the newly inserted disk.
      If you have two floppy drives, the 1st floppy drive can be used to
      run the application and the 2nd drive can be managed without issue.

----------------------------------------------------------------------------
Command Line Parameters:

FILEUTIL [/?] [/RESET] [/XT=ON|/XT=OFF] [drive:\][path]

  /?          Displays this help screen.
  /RESET      Deletes all current temp files and configurations and 
              replaces them with their default values.
  /XT=ON      Turns on PC/XT keyboard compatibility mode for legacy devices.
  /XT=OFF     Turns off PC/XT keyboard compatibility mode for legacy devices.
  drive:\     Starts application directory view on that drive. (Default C:\)
  path        Sets the path on the directory to open (optional)

Example: FILEUTIL C:\DOS will start the application viewing the DOS directory.
----------------------------------------------------------------------------
Know Issues:
  * Error handler not enabled in compiled EXE form of application. This is
    due to a compilation error that will need to be resolved at a later 
    date.
  * Copying/Moving to a location with insufficient space does not produce 
    an error message. 
  * When in doubt, use /RESET command line argument to get back to working
    order. It may error out before completing but the application should
    work afterwards. (Reset is done based on order of importance in the 
    files reset, if it fails after 1 or 2, it most likely will not matter).


