Mic or voice recognition in qb4.5

If you have questions about any aspect of QBasic programming, or would like to help fellow programmers solve their problems, check out this board!

Moderators: Pete, Mods

Post Reply
iamdenteddisk
Veteran
Posts: 185
Joined: Mon Jun 30, 2008 4:10 pm

Mic or voice recognition in qb4.5

Post by iamdenteddisk » Fri Jan 23, 2009 10:07 pm

anyone with code to do mic recordings or voice recognition or even sampeling in qb?

User avatar
TmEE
Veteran
Posts: 97
Joined: Mon Mar 17, 2008 11:14 am
Location: Estonia, Rapla
Contact:

Post by TmEE » Sun Jan 25, 2009 9:42 am

You need a sound card that you can control, old ISA based Sound Blasters are quite easy, and there's enough documentation.
Mida sa loed ? Nagunii aru ei saa :P

iamdenteddisk
Veteran
Posts: 185
Joined: Mon Jun 30, 2008 4:10 pm

is compatible ok?

Post by iamdenteddisk » Sun Jan 25, 2009 7:40 pm

all my computers a SB compatible and the "playwave" I have works ok in my program but how do I get the microphone or record samples?

User avatar
TmEE
Veteran
Posts: 97
Joined: Mon Mar 17, 2008 11:14 am
Location: Estonia, Rapla
Contact:

Post by TmEE » Mon Jan 26, 2009 3:33 pm

You need to use a different DSP command to get recording actions going on...
I have no idea from where I got the SB programming manual, it happened some 3 years ago...
Mida sa loed ? Nagunii aru ei saa :P

iamdenteddisk
Veteran
Posts: 185
Joined: Mon Jun 30, 2008 4:10 pm

DSP?

Post by iamdenteddisk » Tue Jan 27, 2009 7:42 am

an 8 bit mono record wave is what I am looking for the mic is an analog device the DSP is for midi A microphone is an analog device and it isnt digital. atleast not untill after it is processed that is what it is i am looking for..

Post Reply