I kno, this is a question. But I put it in the general discussion since it's not a programming question.
My dad broke his computer, so I'm gonna see if I can fix it. It fails to start up, and says some file or something on the harddrive has been changed.
It asks me to run Windows normally, run it in safe mode, run it in safe mode using a network, run it in safe mode using command prompt, or run it from a previous checkpoint were windows was working fine.
I tried all these options, but get the same result and am brought back to the same screen.
I still acess the boot menu and all that stuff, but being the tech noob that I am, I don't exactly know what boot does. I'm gonna do some research to see if I can actually fix it.
If you know anything about computers give me some advice, otherwise my dad will just get a new computer and he will let me take the broken one apart
Computer Help
- Raspberrypicker
- Veteran
- Posts: 55
- Joined: Thu Aug 02, 2007 4:54 pm
- Location: Florida
Computer Help
Fruit Pickin'
Boot means to start up. I think it's the program that actually turns on the computer and lets everything run. No Boot = No computer.
It sounds like a disk problem. If it is serious, then I think you really can't do much about it, except for playing around with it .
But I don't exactly have an affinity toward computer hardware, so I don't know for sure.
It sounds like a disk problem. If it is serious, then I think you really can't do much about it, except for playing around with it .
But I don't exactly have an affinity toward computer hardware, so I don't know for sure.
For any grievances posted above, I blame whoever is in charge . . .
- Raspberrypicker
- Veteran
- Posts: 55
- Joined: Thu Aug 02, 2007 4:54 pm
- Location: Florida
Was the computer physically damaged?
I highly doubt anyone could write to boot thing, because the computer has to fully boot up so you can write to it. Unless you have some very fancy equipment from IBM, Dell, or Intel.
Regardless, it sounds like you're getting a new computer .
I highly doubt anyone could write to boot thing, because the computer has to fully boot up so you can write to it. Unless you have some very fancy equipment from IBM, Dell, or Intel.
Regardless, it sounds like you're getting a new computer .
For any grievances posted above, I blame whoever is in charge . . .
- Raspberrypicker
- Veteran
- Posts: 55
- Joined: Thu Aug 02, 2007 4:54 pm
- Location: Florida
yes well all of the internet sources have pointed me in the same direction. I have to load up a recovery disk that came with the computer, the bad side: it will delete everything, even the OS, lol. So then I gotta re-install the OS as well. So this is kind of a last resort to me, and then if that fails I get to take it apart!!!
But when I was playing around with it, there was an IDE DPS SELF-TEST (i have no idea what an IDE or a DPS is, just the test part) but it said the driver needed to be replaced. As far as I can tell that's the only driver on the computer, so maybe that's my problem.
Honestly, I kno nothing about computers so yes, i think my dad will be getting a new computer
But when I was playing around with it, there was an IDE DPS SELF-TEST (i have no idea what an IDE or a DPS is, just the test part) but it said the driver needed to be replaced. As far as I can tell that's the only driver on the computer, so maybe that's my problem.
Honestly, I kno nothing about computers so yes, i think my dad will be getting a new computer
Fruit Pickin'
-
- Veteran
- Posts: 703
- Joined: Sun Nov 14, 2004 7:36 am
- Contact:
If it's windows 98 or windows 95, you can try the following.
reboot (in MS-DOS prompt only.
Then go to c:\Windows\system with the DOS CD command.
CD \
CD Windows\system
Then
Attrib -r -s -h user.dat
then
del user.dat
then reboot, Windows should recreate a new user.dat file. That's fixed alot of situation for me in the past.
If it's windows ME or 2000 or XP, then this probably won't work.
let me know.
reboot (in MS-DOS prompt only.
Then go to c:\Windows\system with the DOS CD command.
CD \
CD Windows\system
Then
Attrib -r -s -h user.dat
then
del user.dat
then reboot, Windows should recreate a new user.dat file. That's fixed alot of situation for me in the past.
If it's windows ME or 2000 or XP, then this probably won't work.
let me know.
When God created light, so too was born, the first Shadow!
MystikShadows
Need hosting? http://www.jc-hosting.net
Interested in Text & ASCII development? Look no further!
http://www.ascii-world.com
MystikShadows
Need hosting? http://www.jc-hosting.net
Interested in Text & ASCII development? Look no further!
http://www.ascii-world.com
- Raspberrypicker
- Veteran
- Posts: 55
- Joined: Thu Aug 02, 2007 4:54 pm
- Location: Florida